TA Instruments DSC Autosampler CE - Page 135

TA I NSTRUMENTS DSC A UTOSAMPLER CE 6–3
Using the Confidence
Test Ready Light
If the Autosampler CE screen fails the confi-
dence test at startup, you can use the red Ready
light on the units back panel (see Figure 6.1) to
determine whether the other confidence tests
detect any errors.
Figure 6.1
The Autosampler CE Confidence
Test Ready Light
Follow the guidelines beginning on the next page
to diagnose problems with the confidence test
Ready light.
Using the Confidence Test Ready Light