TA Instruments DSC Autosampler CE - Page 176

Diagnostics
6–44 TA I NSTRUMENTS DSC A UTOSAMPLER CE
GPIB Error 69
xmit buf ovrflow
(transmit buffer overflow)
Problem: The Autosampler CE GPIB com-
mand-transmitting buffer has over-
flowed.
Solution: Close the DSC Instrument Control
window, and turn off the Autosampler
CE. Then restart the Autosampler CE,
reopen DSC Instrument Control, and
retry your operation.
GPIB Error 70
interface error
Problem: A GPIB interface error has occurred.
Solution: Close the DSC Instrument Control
window, and turn off the Autosampler
CE. Then restart the Autosampler CE,
reopen DSC Instrument Control, and
retry your operation.
GPIB Error 71
command too long
Problem: A GPIB command sent to the Auto-
sampler CE is too long (longer than 32
characters).
Solution: Close the DSC Instrument Control
window, and turn off the Autosampler
CE. Then restart the Autosampler CE,
reopen DSC Instrument Control, and
retry your operation.