TA Instruments DSC Autosampler CE User Manual

1–5TA I NSTRUMENTS DSC A UTOSAMPLER CE
operations for you. The Autosampler CE
has no effect on any other instrument
connected to the controller. You can also
connect two or more Autosampler CEs to
the controller to work with two or more
DSCs.
 The Autosampler CE can change both
reference and sample pans.
 Preprogrammed series of runs, called AS
run sequences, can be created easily
through the Thermal Solutions/Advantage
Instrument Control software. Once you
have created an AS run sequence, you can
edit it and save it on disk. You can even
change parts of an AS run sequence as it is
being run.
 Up to 62 DSC runs can be preprogrammed
on the controller.
 The Autosampler CEs accuracy of pan
placement (
+ 0.008 inches) is more reliable
and repeatable than human operation.
 The sample/reference pan storage tray has
room for 62 pans and can be removed from
the Autosampler CE for easy loading. A
plastic lid is provided for safe carrying. The
order of samples used for each experiment
is completely up to you and need not follow
the order of pans in the Autosampler CE
tray.
 The Autosampler CE operates with crimped,
hermetic, and open pans to support a wide
variety of thermal analysis experiments.
General Features

TA Instruments DSC Autosampler CE Specifications

General

Brand	TA Instruments
Model	DSC Autosampler CE
Category	Laboratory Equipment
Language	English