TA Instruments DSC Autosampler CE User Manual

Introducing the DSC Autosampler CE
TA I NSTRUMENTS DSC A UTOSAMPLER CE1–14
The DSC Autosampler CE keypad operates
independently of the DSC keypad (see your
DSC Operator's Manual for details on its
keypad). The Autosampler CE keypad consists
of four types of keys (see Figure 1.10):
 Autosampler CE control keys:
ENTER MANUAL/AUTOMATIC
ESCAPE/CLEAR RESET SAMPLER
HALT RESUME
 Command keys, which tell the Autosampler
CE to execute a series of movements, run
diagnostic tests, and so on:
AIR LOAD
CALIBRATE SPEED
LIDS TEST
 Motion keys, which move the turret
assembly in the direction indicated on the
key:
EXTEND RETRACT
GRIP RELEASE
RAISE LOWER
ROTATE CW ROTATE CCW
 Numeric entry keys.

TA Instruments DSC Autosampler CE Specifications

General

Brand	TA Instruments
Model	DSC Autosampler CE
Category	Laboratory Equipment
Language	English