TA Instruments DSC Autosampler CE User Manual

1–15TA I NSTRUMENTS DSC A UTOSAMPLER CE
Figure 1.10
The DSC
Autosampler CE Keypad
Some of the Autosampler CE keys have dual
assignments:
 Commands (white keys) or motion directions
(blue keys) are shown on the upper half of
the dual-assignment keys.
 Numeric entries are shown on the lower half
of the keys.
The current assignment of the dual-assignment
keys is determined by the stage of operation of
the Autosampler CE. The numeric entry function
is active only when the Autosampler CE is
requesting numeric input; otherwise, the com-
mand or direction on the upper half of the key is
active.
The DSC Autosampler CE keys are explained in
alphabetical order in Table 1.1 (pages 1-16 to 1-
19). The motion keys are grouped into one entry
entitled The Motion Keys.
Raise
Release
Escape
Enter
RetractLower
TestRe-
sume
Rotate CW
Extend
Rotate CCW
Air
Halt
Calibrate
Load
Lids
Automatic
Manual
Speed
Grip
Reset
Sampler
Clear
Description

TA Instruments DSC Autosampler CE Specifications

General

Brand	TA Instruments
Model	DSC Autosampler CE
Category	Laboratory Equipment
Language	English