TA Instruments DSC Autosampler CE User Manual

Introducing the DSC Autosampler CE
TA I NSTRUMENTS DSC A UTOSAMPLER CE1–16
NOTE:
Except for the HALT and RESET SAMPLER keys, the
Autosampler CE keypad is operable only when the
Autosampler CE is in manual mode (see Chapter 3).
Table 1.1
The Autosampler
CE Keys
Key Description
CALIBRATE Enables you to calibrate
pan, lid, and tray positions
on the Autosampler CE
(see Chapter 4).
ENTER Enters numeric re-
sponses, selects items
from a menu, and stores
calibration positions.
ESCAPE/ Terminates any Autosam-
CLEAR pler keypad entry or
command in progress.
The current assignment of
this key depends on the
stage of operation of the
Autosampler CE:
 When you have
selected one of the
Autosampler CE
command keys
(CALIBRATE, LIDS,
LOAD, SPEED, or
TEST), you can
cancel the command
and return to the
previous command
(table continued)

TA Instruments DSC Autosampler CE Specifications

General

Brand	TA Instruments
Model	DSC Autosampler CE
Category	Laboratory Equipment
Language	English