TA Instruments DSC Autosampler CE - Page 33

1–17TA I NSTRUMENTS DSC A UTOSAMPLER CE
ESCAPE/
CLEAR
(cont'd)
Table 1.1
(continued)
Key Description
by pressing the
ESCAPE/CLEAR
key. In this case, the
ESCAPE function is
active.
 When numeric input is
requested (indicated
by blinking cursor),
you can clear the
current entry by
pressing the ES-
CAPE/CLEAR key.
In this case, the
CLEAR function is
active.
HALT Provides two major
functions (see Chapter 3):
 Temporarily stops
Autosampler CE
motion without
canceling any prior
commands.
 Enables you to switch
from automatic to
manual mode.
LIDS Covers or uncovers the
DSC cell (see Chapter 3).
(table continued)
Description