TA Instruments DSC Autosampler CE

To Next Page

To Previous Page

Calibrating the Autosampler CE

4–28 TA I

NSTRUMENTS

DSC A

UTOSAMPLER

Steps 6 and 9:

Calibrate/Verify

Tray Pos. #11

Calibrate/Verify

Tray Pos. #59

Step 8:

Tray Pos. #11

Calibrated

Tray Pos. #59

Calibrated

14. Press ESCAPE/CLEAR to exit the calibra-

tion procedure.

When you have finished using the Autosampler

CE keypad, remember to close the keypad cover

and finger-tighten the thumbscrews before

starting a method.

NOTE:

TA Instruments DSC Autosampler CE - Page 96