TA Instruments DSC Autosampler CE - Page 99

TA I NSTRUMENTS DSC A UTOSAMPLER CE 4–31
The screen displays:
Sample Pan
Number ? 1
6. Select tray position 6 (press the 6 key, then
press ENTER). The Autosampler CE loads
the pan in tray position 6 into the cell refer-
ence position.
7. Press the LOAD key again.
8. Select option 1 (Load) by pressing ENTER.
9. Select option 2 (Sample) by pressing the 2
key, then pressing ENTER.
10. Select tray position 45 (press 45, then
press ENTER). The Autosampler CE
loads the pan in tray position 45 into the cell
sample (or sample A) position.
11. Press the LOAD key again.
12. Select option 1 (Load) by pressing ENTER.
13. Select option 1 (Ref) by pressing ENTER.
14. Select tray position 55 (press 55, then press
ENTER). The Autosampler CE loads the
pan in tray position 55 into the cell reference
position. The Autosampler CE first unloads
pan 6 from the reference position.
Checking Your Calibration