Takeuchi TB215R - Removing the Covers; Installing the Covers

DISASSEMBLY AND ASSEMBLY
UPPER FRAME
5
4
UPPER FRAME 4E0AX00
Removing the covers
1. Remove the engine hood (1).
a. Open the engine hood, and raise it up temporari-
ly.
b. Take out the mounting bolts in the hinge, and re-
move the pins.
Engine hood: 11 kg (26.5 lb.)
2. Take out the mounting bolts holding the side covers
L and R in place, and remove the side covers.
3. Take out the mounting bolts holding the side frames
L and R in place, and remove the side frames.
Installing the covers
To install, follow the same procedures as for removal but
in the reverse order.