7
5
TRAVELING
TROUBLESHOOTING
5C0AX00TRAVELING
3. Check the 2nd speed switch, harness and control-
ler
īīī ī³īīīīīīīīīīīīīīīīīīīīīīīīīīīīīīīīøīīīīīīīīīīīīīīīīīīīīī
īīīīīīīīīīīīīīīīīīīīīīīī
īī ī·īīīīīīīīīīīīīīīīīīīīīīīīīīīīīīīīīīīīīīīīīīīī
b. Check the harness continuity.
c. Check the switch.
d. Check the controller.
īīīīīī¶īīīīīīīīīīīīīīØīīīīīīīīīīīīīīīīīīīīīīīī
4. Check the 2nd speed solenoid valve
a. Turn the starter switch to the ON position.
ī
īīīÆīīīīīīīīīīīīīīīīīīīīīīīīīīīīīīīīīīīīīīīīīīīīīīīīī-
noid end.
c. Move the lever stand to turn on the limit switch.
īīīī¬īī īīīī īīīīī īīī
īīīīīīī īīīīīī īīīīī īīīīīīī īīīīī īīīī
spool is moved and the circuit is switched, the sole-
noid valve is normal.
5. Check the swivel joint
ī ī ī§īīīīīīīīīī īīīī īīīīī īīīīīīīīīīī īīīī īīīīīīī īīīīīī īīīī
the 2nd speed control valve from the 2nd speed con-
īīīīīīīīīīīīī©īīīīīīīīīīīīīīīīīīīīīīīīīīīīīīīīīīīīīīīīīī-
connected, and then turn on the 2nd speed switch.
īīī ī¶īīīīīīīīīīīīīīīīīīīīī°ī³īīīīīīīī³ī¶ī¬ī
6. 2nd speed control valve is faulty
Check if the spool of the 2nd speed control valve is
īīīīīīīīīīīīīīīīīīīīīīīīīīīīīīīīīīīīīīīīīīīīīīīīīīīīī
ā4. Disassembly and assembly, Travel motorā
To Next Page
Loading...
