DISASSEMBLY AND ASSEMBLY
ATTACHMENTS
2
4
ATTACHMENTS 4G0AX001
1 2nd auxiliary line piping
2 Do not overtighten the castle nut.
After tightening down the castle nut by hand, firmly tighten it down further until the tightening hole positions line up
properly and then secure the castle nut in place with a cotter pin.
3 After applying NEVER-SEEZ NS (Regular grade) or an equivalent anti-seizing lubricant, put the parts together.
• During assembly, grease the pins using lithium grease EP-2 supplied from the grease nipples.
1. Arm 9. Bucket cylinder 18. Pin
2. Link arm 10. Stop valve 19. Pin
3. Guide link R 11. Adapter 20. Pin
4. Guide link L 12. Shim (Selected usage) 21. Pin
5. Pin 13. Shim (Selected usage) 22. Pin
6. Pin 14. Boom 23. Shim (Selected usage)
7. Pin 15. Wire harness 24. Shim (Selected usage)
8. Pin 16. Working lamp 25. Shim (Selected usage)
8-1. Pin 17. Boom cylinder 26. Arm cylinder
To Next Page
Loading...
Need help?
General
