Takeuchi TB215R - Page 91

DISASSEMBLY AND ASSEMBLY
SERVICE STANDARDS
3
4
SERVICE STANDARDS 4A0AX00
Replacing the pin and bushing
Replace the pin or the bushing if there is looseness of 1 mm (0.04 in.) or more.
Unit: mm (in.)
Code Item Standard dimension
1 Bucket and arm 30 (1.18)
2 Bucket and link 30 (1.18)
3 Arm and link 30 (1.18)
4 Bucket cylinder and link 30 (1.18)
5 Bucket cylinder and arm 30 (1.18)
6 Arm and boom 35 (1.38)
7 Arm cylinder and arm 35 (1.38)
8 Arm cylinder and boom 35 (1.38)
9 Boom and swing bracket 35 (1.38)
10 Boom cylinder and boom 35 (1.38)
11 Boom cylinder and swing bracket 35 (1.38)
12 Swing bracket and turntable 50 (1.97)
13 Swing bracket and turntable 50 (1.97)
14 Swing cylinder and swing bracket 30 (1.18)
15 Swing cylinder and turntable 30 (1.18)
16 Blade cylinder and blade 30 (1.18)
17 Blade cylinder and lower frame 30 (1.18)
18 Blade and lower frame 30 (1.18)
19 Spanner cylinder and frame R 30 (1.18)
20 Spanner cylinder and frame L 30 (1.18)