Score Selection
ESC ( -
Data Structure
ASCII ESC "(" "-" <3> NUL <1> <n
1
><n
2
>
hex. 1B282D030001<n
1
><n
2
>
dec. 274045301<n
1
><n
2
>
Description
This Escape sequence switches on and off the underscore, overscore and strike-through
modes. The lines can be single or double, broken or continuous.
n
1
=loc
n
2
=type
loc (n
1
)
The parameter n
1
indicates the location of the score to be printed.
The following values are avaiable:
1 (hex.01) = underscore mode
2 (hex.02) = strike-through mode
3 (hex.03) = overscore mode
type (n
2
)
The parameter n
2
indicates the type of score to be printed.
The following values are avaiable:
0 (hex.00) = cancel scoring selected by n
1
(loc)
1 (hex.01) = single continuous line
2 (hex.02) = double continuous line
5 (hex.05) = single broken line
6 (hex.06) = double broken line
This command can be used more than once to activate the underscore, strike-through
and overscore modes at the same time with different line types.
This mode cannot be used to underscore, strike-through or overscore block graphic char-
acters.
40
Character Styling
To Next Page
Loading...
