TallyGenicom Matrix Printer - Double Height

Double Height
ESC w
Data Structure
ASCII ESC "w" <n> double height ON/OFF
hex. 1B 77 <n> or n
dec. 27 119 <n> or n
Description
By means of this code sequence the characters of the subsequent text are specified with
double height.
ESC w followed by n=1 (hex.01 or hex.31) sets double height printing. To reset the
double height to the normal height, specify n=0 (hex.00 oder hex.30).
The line spacing is not altered. This command cannot be combined with superscript/sub-
script or condensed print commands.
ESC w with parameter n=0 (hex.00 or hex.30) resets character representation back to
normal character height.
Example
10 REM double height
20 LPRINT "for ";
20 LPRINT CHR$(27);"w";CHR$(1);
30 LPRINT "Headlines ";
40 LPRINT CHR$(27);"w";CHR$(0);
50 LPRINT "double height printing is recommended"
46
Character Styling