Form Feed FF
Data Structure ASCII FF [A] form feed
hex. 0C
dec. 12
Description When the printer receives this code, it prints the data in the print buffer, then advances
the paper from the current pritn position to the top-of-form position on the next page.
Cut sheet:
Forms are ejected. The first print position on the following paper is the first (top) physi-
cally possible position.
Fanfold paper:
The paper is moved by the form length given before. The first print position on the follow-
ing paper is the first (top) physically possible position.
The FF code can also give a carriage return if automatic carriage return is selected (refer
to Operator’s Manual). The next print is started in the column following the print end of
the last print-out if no CR is transmitted.
After switching on the printer the default form length is set to 12 inches (72 lines) per
page (Europe 12"; USA 11").
62 Print Positioning
To Next Page
Loading...
