TallyGenicom Matrix Printer - Codabar A;t, B;n, C;*, D;e (9, 10, 11, 12); UPC-A (Style 13)

7265 Programmer’s Manual
52
Copyright © 2004 TallyGenicom Chapter 3 ANSI Bar Codes
Codabar A/t, B/n, C/*, D/e (9, 10, 11, 12)
1 Bars per character: 4 dark bars and 3 light bars
2 Character set: 0 through 9 and the four additional characters :/ . +
3 Start/Stop characters: Yes (A,B,C,D/A,B,C,D,T,N,*,E)
4 Center character code: None
5 NULL character: Yes
6 Intercharacter gap: None
7 Characters per symbol: Variable
8 Check digit: If needed, it must be generated by the data source
9 Delimiters: Space, comma, horizontal tab, hp_relative
10 HR characters: Currently selected font, special HR font, special OCR-A/OCR-B
font (120 DPI only)
11 CPI at default element widths: 5.05
12 Combined start-stop character length: 0.458"
UPC-A (Style 13)
1 Bars per character: 2 dark bars and 2 light bars
2 Character set: 0 through 9
3 Start/Stop characters: 2 dark bars and 1 light bar
4 Center character code: Yes
5 NULL character: Yes
6 Intercharacter gap: None
7 Characters per symbol: 12
8 Check digit: The check digit can
be supplied by the data source
9 Delimiters: Space, comma, horizontal tab, hp_relative
10 HR characters: Currently selected font, special HR
11 CPI at default element widths: 7.64