TallyGenicom Matrix Printer - Eject Form; Sheet Feeder;Paperway

Sheet Feeder/Paperway CSI ... {
Eject Form CSI 2 J
Data Structure ASCII CSI n ; n
1;
n
2
"{" [A] set sheed feeder
hex. 9B n 3B n
1
3B n
2
7B
dec. 155 n 59 n
1
59 n
2
123
ASCII CSI "2" "J" [C] eject form
➊
hex. 9B 32 4A
dec. 155 50 74
Description With the sequence CSI n ; n
1
; n
2
{ for n the following parameters are available:
n hex. dec. sheet feeder
0 30 48 cut sheet paper (manual)
➋
5 35 53 fanfold paper (tractor 1) ➌
6 36 54 fanfold paper (tractor 2) ➍
21 32 31 50 49 bin 1 (front) ➎
22 32 32 50 50 bin 2 (rear) ➎
23 32 33 50 51 bin 3 (reserved) ➏
31 33 31 51 49 stacker 1 of the sorter ➐
50 35 30 53 48 move paper to normal print position ➑
(return of view- or tear-off position)
51 35 31 53 49 move paper to tear-off position
➒
52 35 32 53 50 move paper to view position ➓
51 35 31 53 49 cuts fanfold paper at the next perforation ➀
54 35 34 53 52 cut is made above/below the current line ➁
n
1
[C] specifies the horizontal print head position during the paper loading process
(is ignored with new printer models)
n
2
[C] specifies an optional correction value for the vertical load position in n∗
1
⁄
72
inches
(top of form adjustment or vertical alignment, also see “Positioning the first print
line (Phys.adj)”, Operator’s Manual, chapter 4).
76 Miscellaneous