Secured/Unsecured Mode
Unsecured mode ESC PSC0 ESC \
Secured mode ESC PSC1 ESC \
Data Structure ASCII ESC "P" "S" "C" "0" ESC "\" Unsecured mode
hex. 1B 50 53 43 30 1B 5C
dec. 27 80 83 67 48 27 92
ASCII ESC "P" "S" "C" "1" ESC "\" Secured mode
hex. 1B 50 53 43 31 1B 5C
dec. 27 80 83 67 49 27 92
Description In secured mode, the amount of space the barcode or LCP character requires is "secu-
red". In each line, additional barcode and normal characters can be printed.
These additional characters are printed in the current line and in the following lines wi-
thout influencing the barcode or LCP character. As a result normal characters can be prin-
ted to the right or left of the barcode or LCP character in each line.
In order to guarantee successful barcode and LCP character printing, it is important to in-
sert the correct paper feed commands, so that paper feed is ensured to the end of the
barcode and LCP height.
In unsecured mode, the paper feed necessary for barcode and LCP printing is automatic
and it is not possible to print more than one line with normal characters in the barcode
and LCP line.
All characters in the mixed line are printed, so that the bottom edges are aligned in a
straight line.
6 Secured/Unsecured Mode
To Next Page
Loading...
