TallyGenicom Matrix Printer - Font Designation (FNT)

Font Designation (FNT) CSI ... SP D
Data Structure ASCII CSI n
1;
n
2
SP "D" [A] designate font
hex. 9B n
1
3B n
2
20 44
dec. 155 n
1
59 n
2
32 68
Description n
1
= font number 0...9
n
2
= identification (ID) of the desired font
For n
2
the following parameters are available:
n
2
hex. dec. identification
0 30 48 Roman
1 31 49 Sans Serif
2 32 50 Courier
3 33 51 Prestige
4 34 52 Script
5 35 53 OCR B
6 36 54 OCR A
737 55 Modern
8 38 56 Kaufmann
9 39 57 Gothic
10 31 30 49 48 Swiss
11 31 31 49 49 Quadrato
66 36 36 54 54 Courier IBM
The first parameter (n
1
) selects one of ten font registers to which the second parameter (n
2
)
designates one font of the whole repertory in the device. With the sequence CSI 1...m the
designated font can be selected (see page 33, Select Typestyle).
n
1
is in the range of zero to nine and selects primary font, first alternate font etc. up to the
nineth alternate font.
The second parameter (n
2
) is defined by your printer type and represents an identification
of the desired font.
Character Styling
43