TallyGenicom Matrix Printer - Page 289

A vertical tabulation is executed by the VT control code (hex.0B, dec.11); also see page 50,
Vertical Tab Stop.
Example 10 REM vertical tabs
20 LPRINT CHR$(27);"[10t";:REM set form length
30 LPRINT CHR$(27);"[4g";:REM clear all vtabs
40 LPRINT CHR$(27);"[3;5;9v";
50 LPRINT CHR$(11);"this is the first vertical tab, line 3"
60 LPRINT CHR$(11);"this is the second vertical tab, line 5"
70 LPRINT CHR$(11);"this is the third vertical tab, line 9"
80 END
Print Positioning 53