39
4. After the reactivation has been completed, the settings will have
been successfully made.
[Restart TR-7W] Button
If the browser does not open, if there is an error in the clock settings when getting current
readings from a number of loggers, or if any errors occur during communication, click the [Restart
TR-7W] button.
Note that by restarting, the graph in the TR-7W Web Viewer will also be reset.
NOTE:
- that by clicking the [Send Settings] button or the [Restart TR-7W] button over and over, communication
may become impossible.Please try again after 20 seconds.
To Next Page
Loading...
