93
Q.6 What are other causes of "Communication Error" messages ?
A
One of the following may be the reason.
- If the IP Block setting is ON and communication can occur with only specific PC’s.
- If after several attempts a communication error continues to occur, turn OFF the TR-7W and
restart.
- A warning report mail or test mail is in process. If a sending error occurs, processing takes
time, so please wait for at least one minute before trying again.
Q.7 Which has priority, a wireless LAN or a wired LAN ?
A
If a wireless LAN card is inserted, the wireless LAN will have priority. Because of this, if
the wireless LAN settings are incorrect and a wired LAN is connected, communication
will not take place via the wired LAN and hence communication will not occur.
Q.8
Even after carrying out adjustment settings, the temperature display has
not changed, why ?
A
Has recording been stopped ?
Adjustment settings will not take effect during recording.
Q.9 I forgot the password, what should I do ?
A
First, return the settings to the factory default settings and then redo the settings.
Q.10 Is it possible to hide the IP address history and settings history ?
A
If you wish to disable the History, in the "Menu", select [Login History] and click to "OFF".
Please note that a history will remain viewable from when before it was disabled. To erase
a history, please click on "Clear Login History" in the Menu.
To Next Page
Loading...
