Taylor-Dunn MX-026-00 - Hex Nuts; Hex Lock Nuts (Stover); Other Nuts

Appendixes
Appendix B
Page 5
Appendixes
*Not available at time of printing
Hex Nuts
S.A.E. Grade 5 S.A.E. Grade 8
Hex Lock Nuts (stover)
C
or, or,
B
or, or,
Nuts with no markings are to be treated as S.A.E. Grade 2
Lock nuts use a letter to indicate the grade of the nut. Grade A’ locknuts would be the equivelent of Grade ‘2’
hex nuts, Grade ‘B’ as Grade ‘5’ and Grade ‘C’ as Grade ‘8’.
NOTE: Nuts with no markings are to be treated as S.A.E. Grade A
S.A.E. Grade B S.A.E. Grade C
Other Nuts
Other nuts used by Taylor-Dunn
®
should be treated as S.A.E. grade A
Grade L’9
Metric Nuts
5.8 8.8 10.9 12.9