EasyManua.ls Logo

Taylor-Dunn MX 1600 - How to Identify Your Vehicle

Taylor-Dunn MX 1600
240 pages
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
INTRODUCTION
Introduction Page-6
HOW TO IDENTIFY YOUR VEHICLE
This manual applies to vehicles with the same model and serial numbers listed on the front cover.
These vehicles are designed for driving on smooth surfaces in and around facilities such as industrial
plants, nurseries, institutions, motels, mobile home parks, and resorts. They are not to be driven on
public highways.
This vehicle conforms to requirements for Type E vehicles as described in O.S.H.A. Standard Section
1910.178 (Powered Industrial Trucks) and with all applicable portions of the American National Standard
for Personnel and Burden Carriers (ANSI B56.8).
The locations of the model and serial numbers are illustrated below:
This vehicle is not designed to be driven on public roads or highways.
It is available in maximum designed speeds ranging from 7 to 15
mph. Do not exceed the maximum designed speed. Exceeding the
maximum designed speed may result in steering difficulty, motor
damage, and/or loss of control. Do not exceed locally imposed speed
limits. Do not tow at more than 5 mph.
MX 1600B 1-50
B 1-50 and MX
1600
B 1-50 and MX 1600

Table of Contents

Related product manuals