Taylor-Dunn MX 1600 - Appendixes

Appendixes
Contents
Appendix A: Special Tools .................2
Appendix B: Suggested Torque
Limits for Standard Hardware.........3
Hardware Identification......................3
Standard Head Markings ...................................... 3
Hex Bolts .............................................................. 3
Other Bolts ............................................................ 3
Hex Nuts ............................................................... 4
Hex Lock Nuts (stover) ........................................ 4
Other Nuts ............................................................. 4
Suggested Torque Values (non-critical hardware) 5
Appendix C: Brake Lining
Handling Precautions....................7
REV B