Appendixes
Appendixes
Appendix A
Page 2
APPENDIX A: SPECIAL TOOLS
DESCRIPTION PURPOSE PART NUMBER
Test Light
Used for testing electrical circuits. Powered by the truck
batteries, switchable for 12, 24, 36, and 48 volts.
62-027-00
Accelerator Test Harness
Used to test the solid state accellerator module part number
series 62-033-XX.
62-027-31
PMC Test Kit
Includes 62-027-00, 62-027-31, and supplementary
troubleshooting manual M3-001-06. For controllers
equipped with pins labeled KSI and #2 only.
62-027-60
Curtis® PMC Handheld
Programmer
Used to test and program the 62-215-00 PMC speed control
used on early model C4-25 Huskey.
62-027-10
PMT/C Meter Reset Module
Used to reset the PMT/C maintenance meter after a
maintenance is completed.
96-500-43
Disc Brake Boot Installation
Tool
Used to install the rubber boot on all disc brake bodies.
41-350-13
Pin Removing Tool
Used to remove pins and sockets from AMP connectors.
75-440-55
Pin Removing Tool
Used to remove pins and sockets from MOLEX connectors.
75-442-55
Hydrometer
Used to check the specific gravity of battery electrolyte.
77-200-00
Battery Filler
Used to safely add water to batteries.
77-201-00
Solder Kit For Field Stud
Used to solder the aluminum field wire to the field stud. For
use on motors with soldered connections only.
70-210-63
To Next Page
Loading...
