TDK-Lambda Z+ series - Initiate Subsystem

101
DISPlay:STATus
Turns front panel voltage and current display toggle On or Off.
SCPI Command Syntax DISPlay[:WINDow]:STAT <bool>
GEN Command Syntax none
Parameters 0|OFF 1|ON
Examples DISP:STAT 1 DISP:STAT OFF
Query Syntax DISPlay[:WINDow]:STAT?
Returned Parameters 0 |1
DISPlay:FLASh
Makes front panel voltage and current displays flash.
SCPI Command Syntax DISPlay[:WINDow]:FLASh <bool>
GEN Command Syntax none
Parameters 0|OFF 1|ON
Examples DISP:FLASh 1 DISP:FLASh OFF
Query Syntax DISP:FLASh?
Returned Parameters 0 |1
7.12.7 INITiate Subsystem
INITate
[:IMMediate]
:CONTinuous <bool>
INITiate
Enables the trigger subsystem. If a trigger circuit is not enabled, all trigger commands are ignored.
SCPI Command Syntax INITiate[:IMMediate]
GEN Command Syntax None
Parameters None
Examples INIT:IMM
Query Syntax None