TDK-Lambda Z+ series - Page 106

105
STATus:OPERational:CONDition?
Returns the value of the Condition register, which is a read-only register that holds the real-time
(unlatched) operational status of the power supply.
SCPI Command Syntax STATus:OPERation:CONDition?
GEN Command Syntax STAT?
Parameters None
Returned Parameters <NR1> (Register Value) decimal
Examples STAT:OPER:COND?
STATus:OPERational:ENABle
Sets the value of the Enable register. This register is a mask for enabling specific bits from the
Condition register to the Event register.
SCPI Command Syntax STATus:OPERation:ENABle <NRf>
GEN Command Syntax SENA nnnn, SENA?
Parameters 0…7FFF
Returned Parameters <NR1> (Register Value) decimal
Default Value 0
Query Syntax STATus:OPERation:ENABle?
Examples STAT:OPER:ENAB 1312 STAT:OPER:ENAB 1
STATus:QUEStionable:EVENt?
This query returns the value of the Event register. It is a read-only register that receives data from
the Condition register according to Enable register setting. Reading the Event register clears it.
SCPI Command Syntax STATus:QUEStionable:EVENt?
GEN Command Syntax FLT?
Parameters None
Returned Parameters <NR1> (Register Value) decimal
Examples STAT:QUES:EVEN?
STATus:QUEStionable:CONDition?
Returns the value of the Condition register, which is a read-only register that holds the real-time
(unlatched) operational status of the power supply.
SCPI Command Syntax STATus:QUEStionable:CONDition?
GEN Command Syntax FEVE?
Parameters None
Returned Parameters <NR1> (Register Value) decimal
Examples STAT: QUES: COND?