TDK-Lambda Z+ series - Page 108

107
SYSTem:LANGuage
SCPI Command Syntax SYSTem:LANGuage GEN
GEN Command Syntax LANG SCPI
Parameters GEN
Returned Parameters <CRD>
Example SYST:LANG?
SYSTem:REMote
Sets the power supply to local or remote mode.
SCPI Command Syntax SYSTem:REMote[:STAte] <CRD>
GEN Command Syntax REM
Parameters LOC/0|RMT/1|LLO/2
*RST Value LOC
Examples SYST:REM RMT
Query Syntax SYST:REM?
Returned Parameters LOC|RMT|LLO
SYSTem:VERSion?
SCPI Command Syntax SYSTem:VERSion? <CRD>
GEN Command Syntax REV?
Parameters Rev:1.0.1.0
SYSTem:DATE?
SCPI Command Syntax SYSTem:DATE <CRD>
GEN Command Syntax DATE?
Parameters 2009.11.01
Query Syntax SYSTem:DATE?
Returned Parameters 2009.11.01
SYSTem:PON:TIME?
Time measured from first power On.
SCPI Command Syntax SYSTem:PON:TIME?
Parameters Minute
Examples 6534
Returned Parameters <NRf>