32
Questions? Call 1-866-44-TDSTV or visit tdstv.com.
2. Highlight an arrow next to the series to change its priority:
the up arrow moves the button up one place in the priority list;
the down arrow moves the series one place down,
the top button moves the series to the top of the list.
3. When you’re finished, select Save and then press OK on your remote.
VIEW A LIST OF RECORDINGS
To see a list of programs and series scheduled to record on your Connected-Home DVR,
follow these directions:
1. Press RECORDED TV on your remote. The Recorded TV screen appears.
2. On the horizontal menu bar at the top, use the RIGHT ARROW to choose:
• Scheduled—for individual recordings, including series episodes, in the order
they’ll be recorded.
• Series—for a list of the series you have scheduled to record. For a list of upcoming
episodes specific to a series, select the series name in the list, then press OK on your remote.
The Series info screen appears. Use the LEFT ARROW to select Scheduled from the horizontal
menu bar. The Series info screen now shows the episodes scheduled to record.
3. Use the ARROW or CH/Page button on your remote to scroll through the list.
RESOLVE RECORDING CONFLICTS…
When a recording conflicts with one or more scheduled recordings, a recording conflict screen will
appear on screen to alert you to the problem.
The screen will include at least one recording conflict icon (the crossed-out red dot) next to a program
name. This icon indicates the program had been scheduled but will not actually be recorded. There are
a few different ways you can resolve recording conflicts, as explained below:
…by Canceling a Recording
On the recording conflict screen, select Don’t record “program name”. Then, press OK on your remote.
…by Changing Which Program is Recorded
1. On the Recording conflict screen, select Resolve conflict, then press OK on your remote.
2. Use the ARROW buttons on your remote to select the program you want to record, then press
OK on your remote. The program(s) scheduled for recording will be marked with a red dot. When
you select one program to record, the program(s) beneath it will have their red dots removed.
3. Use the LEFT ARROW to select Save changes, then press OK on your remote.
4. Press EXIT TO TV on your remote.
To Next Page
Loading...
