34
Questions? Call 1-866-44-TDSTV or visit tdstv.com.
3. The Program info screen will appear. In the right-hand sidebar, select Resolve conflict,
press OK on your remote.
4. The Recording conflict screen appears. Choose the previously overridden program/series
episode to record it.
5. Select Save changes and press OK on your remote.
To clear the conflict icon for an individual program or a series, select Don’t record from the Program info
screen (or Cancel series from the Series Info screen). Then, press OK on your remote.
CANCELLING SCHEDULED RECORDINGS…
To cancel a single or series recording there are two options: use the Program Guide or the
recorded TV screen.
...Using the Program Guide
In the Program Guide, programs to be recorded are marked with a red dot (a single dot for an individual
recording, three overlapping dots for a series recording).
1. Use the ARROW buttons on your remote to select the name of the program that’s set to record,
which you want to cancel.
2. If it’s an individual program, press RECORD on your remote control two times. (The first press
changes the program to a series recording with three overlapping dots. The second press cancels
the recording (all dots disappear).
Note: If the series recording schedule on the first press conflicts with another scheduled recording, a
Recording conflict screen appears. Select Record this series only when no conflict occurs and press OK
on the remote. You are returned to the Program Guide where three overlapping red dots are shown in
the Program Guide’s cell. Press RECORD again to cancel the recording.
If the program is a series recording, press the RECORD button once. The entire series recording is
cancelled and the dots disappear from the Program Guide.
…From the Recorded TV Screen
1. Press RECORDED TV on your remote. The Recorded TV screen appears.
2. From the horizontal menu bar at the top, use the RIGHT ARROW on your remote to select:
• Scheduled—for individual recordings: all upcoming individual recordings including
series episodes will be listed.
• Series—for series recordings: all series will be listed.
3. Use the ARROW or Ch/Page button on your remote to scroll through the list.
4. Select the program or series you want to cancel, then press OK on your remote.
The Program info/Series Info screen appears.
5. Select Don’t Record/Cancel Series, then press OK on your remote.
6. Select Cancel Recording/Cancel Series on the next screen, then press OK.
To Next Page
Loading...
