TDS TV - System Sound Effects; Changing Digital Audio Output

55
Questions? Call 1-866-44-TDSTV or visit tdstv.com.
System Sound Effects
TDS TV provides sound effects (beeps and clicks) when you press buttons on your remote control to navi-
gate and select features. To turn sound effects on/off, do this:
1. Press MENU button or the LEFT ARROW on your remote.
2. Use the DOWN ARROW button to select Settings on the vertical menu bar.
3. Select General, then press OK on your remote.
4. Use the DOWN ARROW button to select System sound effects, then press OK on your remote.
5. From the System sound effects screen, select Play sound effects or Mute sound effects,
then press OK on your remote.
6. Use the ARROW buttons to select Save, then press OK on your remote.
Changing Digital Audio Output
To change the digital audio output, do this:
1. Press MENU button or the LEFT ARROW on your remote.
2. Use the DOWN ARROW button to select Settings on the vertical menu bar.
3. Select Audio, select Digital audio output, then press OK on your remote.
4. From the Digital audio output screen, select Stereo or Surround sound. Select Save,
then press OK on your remote.
Note: If you select Surround sound and do not hear audio, you should select Stereo. Some TVs and
audio receivers do not support surround sound.