Setup
Security Mode — Select the security and the encryption type to use. Select None if
you do not want to use any security mode.
WEP
WEP (Wired Equivalent Privacy) is the basic security method. With WEP security, all
wireless devices must enter the same key to connect to the network.
Authentication Type — Select an authentication type. Options are:
• Auto: Select Auto if you are unsure which authentication is suitable for
your wireless devices.
• Open System — Open System allows public access to the Wireless Gateway
via wireless communications.
• Shared Key — Requires users to enter the same WEP key to exchange data
with other wireless devices.
Encryption Strength — Select 64bit to enter or generate a 10-character key or select
128bit to enter or generate a 26-character key.
Key Format — Select HEX to generate hexadecimal characters only or ASCII to
generate ASCII characters.
Passphrase — Enter a passphrase, then click the Generate button to automatically
generate WEP keys.
Key 1, 2, 3, 4 — When you enter a passphrase and click the Generate button, these
fields display the auto-generated keys. Otherwise, enter the WEP key(s) manually.
Click the Apply button to save your changes or click the Cancel button to discard your
changes.
Wireless ADSL2+ Gateway 33
To Next Page
Loading...
Need help?
General
