Technicolor TD5130 - Page 74

Advanced
4. Enter values for Query Interval, Robust Count, Last Member Query Interval,
Last Member Query Count, and Query Response Interval. If you are unsure
about them, leave the default values.
5. Click the Apply button to save and apply changes.
MLD Snooping
With MLD snooping, your Wireless Gateway can make intelligent multicast
forwarding to connections that have group members attached in IPv6 protocol.
1. On MLD Option, select Snooping.
2. To enable fast leave option, check the Fast Leave box.
3. Check Drop Unknown Stream box to drop unknown streams.
4. Enter values for Last Member Query Interval, Last Member Query Count, and
Query Response Interval. If you are unsure about them, leave the default
values.
5. Click the Apply button to save and apply changes.
Wireless ADSL2+ Gateway 74