7
1 Getting started
DMS3-CTC-25-282 v1.0
1.3.2 Local network connection
Overview
Wireless access point
The built-in 2.4Ghz and 5 GHz wireless access points provide wireless access to your wireless clients.
For more information, see “4 Wireless networking” on page 35.
Ethernet switch
The Ethernet switch ( ) allows you to connect an Ethernet device (for example, a computer) to your local network. For
more information, see “2.3 Connecting your network devices to the TG789vac v2” on page 20.
All Ethernet ports on the TG789vac v2 are Gigabit Ethernet ports and have a maximum speed of 1 Gbps (Gigabit per
second).
A LED may be provided per Ethernet port to indicate link integrity (or activity).
USB Port
The USB port ( ) can be used to:
• Connect a USB mass storage device to share your content (for example, music, movies,...):
On your local network via the Network File server or the UPnP AV media server.
On the Internet via FTP.
For more information, see “7 Sharing content” on page 54.
• Connect a mobile Internet adaptor to set up a mobile Internet connection that can work as a backup for your main
Internet connection. For more information, see “2.5 Setting up a mobile fall-back WAN connection” on page 24.
LED Status Description
Solid on Device connected.
Blinking Device connected and sending/receiving data.
Off No device connected.
To Next Page
Loading...
