Technicolor TG789vac v2 - Inserting a Mobile USB Adapter

26
2Setup
DMS3-CTC-25-282 v1.0
2.5.2 Inserting a mobile USB adapter
Procedure
Once the mobile connection is configured you can proceed as follows to insert the mobile USB adapter:
1 Power off the TG789vac v2.
2 Insert your SIM card into the mobile USB adapter.
3 Plug the mobile USB adapter in (one of) the USB port(s) of your TG789vac v2:
4 Power on the TG789vac v2.
If you do not power off the TG789vac v2 first, the mobile USB adapter will not be detected.