EasyManua.ls Logo

Technicolor TG789vac v2 - Setup

Technicolor TG789vac v2
103 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
14
2Setup
DMS3-CTC-25-282 v1.0
2Setup
Introduction
This chapter will help you to setup your TG789vac v2.
DSL service requirements
This section is only applicable if you are using your TG789vac v2 as DSL gateway. For more information, see “1.2 User
scenarios” on page 4.
Make sure that:
Your service provider activated the DSL service on your telephone line by your service provider.
You have the installation information (for example, user name, password, service profile,...) provided by your service
provider at hand.
Local connection requirements
Wireless connection
If you want to connect your computer using a wireless connection, your computer must be equipped with a Wi-Fi certified
wireless client adapter.
Wired connection
If you want to connect a computer using a wired connection, your computer must be equipped with an Ethernet Network
Interface Card (NIC).
Setting up your network
Proceed as follows:
1 Connect the TG789vac v2 to your service provider’s network.
For more information, see “2.1 Connecting the TG789vac v2 to your service provider’s network” on page 15.
2 Power on the TG789vac v2.
For more information, see “2.2 Powering on the TG789vac v2” on page 19.
3 Connect your network devices (for example, a computer) to the TG789vac v2.
For more information, see “2.3 Connecting your network devices to the TG789vac v2” on page 20.
4 Configure the TG789vac v2.
For more information, see “2.4 Configure the TG789vac v2” on page 23.
5 Connect your phones.
For more information, see “5 Telephony” on page 43.
6 Share your content or media on your local network, continue with “7 Sharing content” on page 54.
7 If you purchased a mobile USB adapter, setup the mobile backup connection.
For more information, see “2.5 Setting up a mobile fall-back WAN connection” on page 24.
8 Once you successfully installed the TG789vac v2, it is recommend to backup your configuration. This allows you to return
to this configuration when needed (for example, after misconfiguration). For more information, see “3.2 Backing up/
restoring your configuration” on page 33.
If your service provider included a setup CD/DVD in your box, please follow the instructions from that setup CD/
DVD instead.

Table of Contents

Other manuals for Technicolor TG789vac v2

Related product manuals