35
4 Wireless networking
DMS3-CTC-25-282 v1.0
4 Wireless networking
Introduction
This section will help you set up your wireless network for your wireless devices.
What you need to set up a wireless network
To set up a wireless network, you need the following components:
•A Wireless access point (already integrated into your TG789vac v2)
•A Wireless client the device that you want to connect (for example, a computer, smartphone, network printer,...)
Wireless access point
The wireless access point:
• Connects your wireless devices to the TG789vac v2 (and its services).
• Allows you to secure the data sent over wireless connection.
Your TG789vac v2 is equipped with two wireless access points:
• The 5 GHz wireless access point offers superior transfer rates, is less sensitive to interference and allows you to connect
IEEE802.11ac/n/a wireless clients.
• The 2.4 GHz wireless access point allows you to connect IEEE802.11n/g/b wireless clients. Use this access point for
wireless clients that don’t support 5 GHz.
Wireless client
The wireless client allows you to connect a device, typically a computer, to a wireless access point. Both built-in and external
(for example via USB) clients are available.
Check the documentation of your computer if you are not sure if your computer is equipped with a wireless client.
Configuring your wireless clients
For more information on how to establish a wireless connection to the TG789vac v2, see:
• “4.1 Connecting your wireless client via WPS” on page 36
• “4.2 Connecting your wireless client without WPS” on page 38
• “4.3 Connecting your wireless client by scanning a QR code” on page 39
Secure your wireless connection!
When using an unsecured connection, everyone who is within the range of your TG789vac v2 can access your network. If
not:
• People may use your connection to access the Internet.
• Hackers may use your connection to commit computer crimes.
You can easily prevent this by securing your wireless access point. For more information, see “4.4 Securing your wireless
connection” on page 40.
Nowadays devices like media players and smartphones have a built-in wireless client. Check the documentation of
your device for more information.
To Next Page
Loading...
