67
7 Sharing content
DMS3-CTC-25-282 v1.0
7.5 Safely removing your USB storage device
Introduction
If you just unplug your USB storage device from the TG789vac v2 you may loose your data. To avoid this you must first stop
your USB storage device.
Stopping your USB storage device
Proceed as follows
1 Browse to the TG789vac v2 GUI.
For more information, see “Accessing the TG789vac v2 GUI” on page 29.
2 On the Toolbox menu, click Content Sharing.
3 In the Navigation bar, click Configure.
4 Click Stop.
5 Unplug your USB storage device from the TG789vac v2.
To Next Page
Loading...
