11
1 Getting started
DMS3-CTC-25-282 v1.0
1.3.6 Status LEDs
Introduction
On the top panel of your TG789vac v2, you can find a number of status LEDs, indicating the state of the device.
Info LED
The Info ( ) LED provides information about the overall state of your TG789vac v2. For more information, see “Wireless
On/Off button” on page 10.
Info
Ethernet
Voice
Wireless 2.4 GHZ
Wireless 5 GHZ
Broadband
Internet
WPS
TV
Colour State Description
Green Solid on All services are available. The wireless access point is enabled. The other
status LEDs are deactivated.
Blue Solid on All services are available. The wireless access point is disabled. The other
status LEDs are deactivated.
Red Solid on Some services are not available. The TG789vac v2 automatically activates
the other status LEDs to allow you to see which services are running.
Orange Solid on Bootloader selftest
Blinking Bootloader active (during upgrade)
Off The TG789vac v2 is powered off.
The other status LEDs are only activated when the Internet service is down.
To Next Page
Loading...
