51
6 Saving energy
DMS3-CTC-25-282 v1.0
6.1 Code of Conduct
Power states
Code of Conduct provides guidelines to optimise and reduce the power consumption devices such as your TG789vac v2 in:
• Full power state:
This is the normal operation mode of the device, where all functionality is enabled.
• Low power state (dynamic):
When there is no user traffic on the device, the device switches to a low power mode. This is a state in which devices are
only allowed to use a limited amount of energy to be able to power its components and respond to user activity.
Example
Take the following example:
• The user switches off his computer at 20:00.
• There are no other devices connected to the TG789vac v2.
The TG789vac v2 switches to low power mode. This results in a considerable drop in the overall power consumption of the
TG789vac v2.
No user traffic
User traffic
Time
Power
Consumption
Full power limit
Low power limit
20:00
To Next Page
Loading...
