33
3 Configuration tools
DMS3-CTC-25-282 v1.0
3.2 Backing up/restoring your configuration
Introduction
Once you have configured your TG789vac v2 to your needs, it is recommended to backup your configuration for later use.
This way you can always return to your working configuration in case of problems.
Backing up your configuration
Proceed as follows:
1 Browse to the TG789vac v2 GUI.
For more information, see “Accessing the TG789vac v2 GUI” on page 29.
2 On the MediaAccess Gateway menu, click Configuration.
3 In the Pick a task list, click Save or Restore Configuration.
4 Under Backup current configuration, click Backup Configuration Now.
5 The TG789vac v2 prompts you to save your backup file.
6 Save your file to a location of your choice.
Restoring your configuration
Proceed as follows:
1 Browse to the TG789vac v2 GUI.
For more information, see “Accessing the TG789vac v2 GUI” on page 29.
2 On the MediaAccess Gateway menu, click Configuration.
3 In the Pick a task list, click Save or Restore Configuration.
4 Under Restore saved configuration, click Browse and open your backup file.
5 The TG789vac v2 restores your configuration.
6 If needed, the TG789vac v2 will restart.
Do not change the file extension.
Do not edit the backup files as this may result in corrupt files making them worthless as configuration backup.
Backup files usually have .ini as extension.
To Next Page
Loading...
