Technicolor TG789vac v2 - Network Time Server

78
8 Network Services
DMS3-CTC-25-282 v1.0
8.4 Network time server
Introduction
A Network Time Server is a server that makes sure that the time settings of your TG789vac v2 are perfectly synchronized
with the official time.
This time will be used for features like:
• Access Control
For more information, see “9.3 Access Control” on page 88.
• Wireless Time Control
For more information, see “9.4 Wireless Time Control” on page 90.
•Call logs
•Event logs
Requirements
Your TG789vac v2 must be connected to the Internet.
Specifying a time server for your TG789vac v2
Proceed as follows:
1 Browse to the TG789vac v2 GUI.
For more information, see “Accessing the TG789vac v2 GUI” on page 29.
2 On the MediaAccess Gateway menu, click Configuration.
3 The System Configuration page appears. On the Navigation bar, click Configure.
4 Under Time Configuration, select Auto-configuration and configure the following settings:
 Time Zone:
Select your time zone from this list.
 Summer Time:
Select Summer Time if you want the clock to follow daylight saving time.