Technicolor TG789vac v2 - Service Provider Connection

15
2Setup
DMS3-CTC-25-282 v1.0
2.1 Connecting the TG789vac v2 to your service provider’s
network
Introduction
This section helps you to connect the TG789vac v2 to your service provider’s network.
Identifying your setup
If you are using the TG789vac v2 as:
• DSL Gateway, continue with “2.1.1 Setting up your TG789vac v2 as DSL gateway” on page 16.
• Local Router , continue with “2.1.2 Setting up your TG789vac v2 as local router” on page 18.
For more information, see “1.2 User scenarios” on page 4, you can use your TG789vac v2 in either of the following scenarios