21
2Setup
DMS3-CTC-25-282 v1.0
2.3.1 Setting up a wireless connection
The TG789vac v2 access points
Your TG789vac v2 is equipped with two wireless access points:
• The 5 GHz wireless access point offers superior transfer rates, is less sensitive to interference and allows you to connect
IEEE802.11ac/n/a wireless clients.
• The 2.4 GHz wireless access point allows you to connect IEEE802.11n/g/b wireless clients. Use this access point for
wireless clients that don’t support 5 GHz.
Requirements
Your network device must be equipped with a Wi-Fi certified wireless client.
Connection speed
When setting up your wireless network, keep in mind that the following factors may have a negative impact on your wireless
connection speed:
• Obstacles (walls, ceilings,...) between the wireless client and the access point.
• Distance between the wireless client and the access point.
If you have problems with your wireless performance, see “Poor Wireless Connectivity or Range” on page 94.
To set up a wireless connections
For more information on how to setup a wireless connection between your network device and your TG789vac v2, see
“4 Wireless networking” on page 35.
To Next Page
Loading...
