12
1 Getting started
DMS3-CTC-25-282 v1.0
Manually activating the status LEDs
If the Info ( ) LED is green or blue, you can press the Info ( ) button to temporarily activate the other LEDs.
Broadband LED (if you are using the DSL Gateway scenario)
Broadband LED (if you are using the Local Router scenario)
Internet LED
Wireless LED
Colour State Description
Green Solid on DSL line synchronised
Blinking Trying to detect carrier signal or pending DSL line synchronisation
Off No DSL line connected
- or -
The status LEDs are deactivated
- or -
TG789vac v2 powered off.
Colour State Description
Green Solid on Connected to the WAN device.
Off Not connected to the WAN device or the status LEDs are deactivated.
Colour State Description
Green Solid on Connected to the Internet, no activity
Blinking Connected to the Internet, sending/receiving data
Red Solid on Failed to setup the Internet connection
Off No Internet connection or the status LEDs are deactivated.
Colour State Description
Green Solid on Wireless clients connected, no wireless activity.
Blinking Wireless clients connected, wireless activity.
To Next Page
Loading...
