17
2Setup
DMS3-CTC-25-282 v1.0
2 Plug one end of the cable in the grey DSL port on the back of your TG789vac v2.
3 Plug the other end of the cable:
In the DSL/Modem output of your splitter/filter.
Directly into the telephone wall outlet if there is no splitter/filter between the network terminator and your local
phone network.
Scenario 2: A TG789vac v2 without integrated filter
Proceed as follows:
1 Take the DSL cable. This is the grey cable that is included in your box.
2 Plug one end of the cable in the grey DSL port on the back of your TG789vac v2.
3 Plug the other end of the cable into the DSL/MODEM output port of your filter/splitter.
Only use the DSL cable provided in the box. Other DSL cables may not work with the DSL subscription that you
purchased.
To Next Page
Loading...
