46
5Telephony
DMS3-CTC-25-282 v1.0
4 Under Te l e p h o n e N u m b e r s , complete the following fields:
SIP URI:
The Uniform Resource Identifier (URI) of your SIP account (for example: +3235051979, john.doe,...). This is the
telephone number that people have to dial to call you.
Username:
The user name of your VoIP account (for example: +3235051979, john.doe,...).
Password:
The password of your VoIP account.
Displayname:
The name that you want people to see on the display of their phone when you are calling.
Abbreviated number:
An internal number to call the phones associated with this VoIP account.
Port:
The phone port that you want to associate with this VoIP account. Select
• All to use this VoIP account for all connected phone.
• Phone (1/2) to use this VoIP account for the phone connected to the Phone (1/2) port of your TG789vac v2.
5 Click Apply.
6 Repeat this procedure for each VoIP account that you received.
Verifying Telephone Connectivity
Proceed as follows to verify the voice connection:
1 Make sure the TG789vac v2 is turned on.
2 Make sure the Internet telephony service is enabled and configured. The Vo i c e LED on your TG789vac v2 must be solid
green.
3 Pick up your phone, wait for the dialling tone, and dial the number.
Your VoIP provider may not support this feature.
To Next Page
Loading...
