82
9 Internet security
DMS3-CTC-25-282 v1.0
2 On the Toolbox menu, click Parental Control.
3 On the Navigation bar, click Configure.
4 Make sure that the Use Content-Based Filter check box is selected.
5 Configure the content-based filter. For more information, see “9.1.1 Configuring content-based filtering” on page 83.
6 If you want to make exceptions for specific websites, add the necessary rules in the address-based filter. For more
information, see “9.1.2 Adding rules for address-based filtering” on page 84.
Option 2: address-based filter only
Take this option if content filtering is not available on your TG789vac v2 or you don’t want to use it.
To configure address-based filtering:
1 Browse to the TG789vac v2 GUI.
For more information, see “Accessing the TG789vac v2 GUI” on page 29.
2 On the Toolbox menu, click Parental Control.
3 On the Navigation bar, click Configure.
4 Make sure that the Use Address-Based Filter check box is selected.
5 In the Action for Unknown Sites, select:
Allow as the default rule if you want to allow access to all websites and manually specify which websites may not be
accessed.
Block as the default rule if you want to deny access to all websites and manually specify a number of websites that may
be accessed.
6 Click Apply.
7 If you want to make exceptions for specific websites, add the necessary rules in the address-based filter.
For more information, see “9.1.2 Adding rules for address-based filtering” on page 84.
To Next Page
Loading...
